AHD camera module board
ACC-1G0
Analog AHD WDR / HDR Video Module (1080p)
. 1/2.8" 2MP Sony Starvis Color CMOS - IMX327LQR-C
. 17Ø / 17Phi Type 3 PCB Micro AHD Camera Boards
. WDR / HDR, DSS(Sense-up), 3D-DNR/3DNR, D-zoom, Serial Protocol
. OSD Port, UTC, RS485 / DC5~12V
Refer to the AHB series for complete miniature cameras.
# AHD Board Camera
# AHD Module
# Camera Module
# PCB Module
# 17 Phi
# ACC 1G0, ACC1G0
# TVI CVI Compatible
Specification
1080p AHD interface Color CMOS camera PCB module / board
Model |
ACC-1G0 |
|
Signal System |
AHD |
|
Pickup Device | 1/2.8"(D-6.46mm) 2.12MP Sony Color CMOS Sensor | |
Scanning System | 16:9 Progressive | |
Sync. System | Internal | |
Total Pixels | 2.16MP [1945(H)x1109(V)] | |
Active Pixels | 2.12MP [1937(H)x1097(V)] | |
Min. Illumination | 0.01Lux(F2.5 - 30IRE), 0.0003(DSS on) | |
ICR | N/A | |
Video Out | AHD2.0: 1080p@25/30 or Analog CVBS: D1 | |
Lens | Fixed IRIS Lens only | |
Lens Holder(Mount) | N/A | |
OSD | Via OSD Port (Option: OSD Cable), Serial Communication(Option: Terminal Block Cable), and UTC | |
Camera Title | Off, On (Max. 8 Characters) | |
Language | English, Chinese(Simplified), Chinese(Traditional), Japanese, Korean | |
Exposure | AE, Manual | |
White Balance | AUTO, AUTOext, Preset, Manual | |
BLC | Off, HLC, BLC, WDR | |
Day & Night | Auto, Color, B/W, EXT. D&N | |
Gain Control | AGC (0~10) | |
Electronic Shutter | 1/25(30)~1/25,600(30,000)sec (50Hz/60Hz) | |
DSS (Sens-up) | Off, On (Max. x32) | |
Noise Reduction | 3DNR (Off, Low, Middle, High) | |
Mirror | Off, On (Mirror, Flip, Both) | |
Other Features | Motion Detection (4 Zones), Privacy Mask (16 Zones), ACE, D-Zoom, Defog, Gamma, Shading Etc. | |
Microphone | N/A | |
Communication | Available (Pelco-D & ParanTek Serial Protocol) | |
Power Source | DC 5~12V | |
Power Consumption | Less than 1.6 Watts (130mA@DC12V) | |
Operating Temp. | -10℃~55℃ (Humidity: 0%RH ~ 90%RH) | |
Size | 17Ø, etc. (3 Boards) | |
Weight | 4.5g (without OLPF) |
Cable (Video - Power / BNC - DC)
Cable (Video - Power - OSD Switch / BNC - DC - OSD Joystick)
Cable (Video - Power - RS485 / BNC - DC - Terminal Block)
Cable (Video - Power - OSD Switch - RS485 / BNC - DC - OSD Joystick, Terminal Block)